适用于300T以下压力机，作为调整滑块、封闭高度显数控制，行程调整控制。双向控制行程范围0～999mm。显数达到预定上、下限位，即发出电讯号，准确、及时、可靠。输入轴每转一周，数码递增（减）0.1mm,逢十自动进（退）位，额定转速800转/分。孔位尺寸长106mm，宽76mm。

尺寸：长120mm 宽88mm  高74mm

The utility model is suitable for a press under 300T, which is used as an adjusting slide block, a closed height number display control, and a stroke adjustment control. The bidirectional control range is 0 to 999mm. When the number reaches the predetermined upper and lower limit, the electrical signal is issued, accurate, timely and reliable. Input shaft every turn a week, digital increase (minus) 0.1mm, ten automatic (retreat) position, rated speed of 800 RPM / min.. Hole size is 106mm long and 76mm wide.
Size: long 120mm, width 88mm, high 74mm