用于250T以下压力机，适用于机床滑块不能开孔，凸出外面安装，作为调整滑块，封闭高度显数控制，剪，折弯机，其它机器行程调整控制。双向控制行程范围0-999mm。显数达到预定上.下限位，即发出电讯号，准确，及时，可靠。输入轴每转一周，数码递增（减）0.1mm，逢十自动进（退）位，额定转速800转/分。

尺 寸：长118mm  宽104mm 高72mm

Used for 250T press below, suitable for machine tool slider can not open hole, protruding outside installation, as an adjustment slider, closed height control, shear, bending machine, other machine stroke adjustment control.
Bidirectional control stroke range 0-999mm. Show the number reached the predetermined lower limit, that is, the issue of electrical signals, accurate, timely and reliable. Input shaft every turn a week, digital increase (minus) 0.1mm, ten automatic (retreat) position, rated speed of 800 RPM / min..
Size: long 118mm, width 104mm, high 72mm